Gehl RT175 GEN-3 Track Loader

RT175 GEN:3 Track Loader

  • Rated Operating Capacity at 35% Tipping Load: 794 kg
  • Net Power: 51 kW @2500
  • Lift Height: 3251 mm
Find a Dealer Request More Info
Gehl RT175 GEN:3 Track Loader


The Gehl RT175 compact track loader is taking performance to the next level.

  • The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Optional rear bumper/counterweight provides additional protection and towing capability.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Height to Hinge Pin - Fully Raised 3239 mm

Operator's Cabin

The extra-large, state-of-the art operator’s station on the RT175 track loader is designed for optimal operator comfort resulting in more productivity.

  • Cab forward design enhances the view to the bucket.
  • Level II FOPS is standard equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.


Gehl RT175 Track Loader Controls

Controls on the Gehl RT175 compact track loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

  • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
  • Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
  • Multi-purpose LCD display provides easy readout during operation.
  • Single button allows simple scrolling and selection of various display functions.
  • Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
    • Joystick Sensitivity
    • Position Reaction
    • Engine Response
    • AntiStall
    • Pump Swash Plate Position
  • Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.


The RT175 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.
Make/Model Yanmar/4TNV98 Interim Tier 4
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 3.3 L/4
Gross Power @ rpm 52.1 kW @ 2500
Net Power @ rpm 51 kW @ 2500
Peak Torque @ rpm 242.7 Nm @ 1600
Oil Pump Capacity 10.4 L
Alternator Voltage/Amperage 14V/95A
Gehl Track Loader RT175 Engine Access


The RT175 compact track loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.

  • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency and AntiStall technology keeps the power flowing.
  • Power track drive motors deliver superior pushing power.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
Auxiliary Hydraulic Flow - Rated Speed 70.0 L/min
Hight-Flow Hydraulic Flow - Rated Speed 128.8 L/min
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Attachment System

The RT175 compact track loader is available with your choice of two attachment mounting systems designed to enhance jobsite efficiency.

  • All-Tach® system manually engages and disengages with a single lever.
  • Power-A-Tach® system allows for attachment changes electronically at the push of a button, further enhancing jobsite productivity.
  • Both systems are compatible with all universal-style track loader attachments.
Full Line of Edge Attachments for RT175

Lift Arm

The robust lift-arm on the RT175 compact track loader is designed for optimal strength, visibility and capacity.

  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Height to Hinge Pin - Fully Raised 3239 mm
Reach - Fully Raised 876 mm


Serviceability is very important to our customers. The RT175 is sure to exceed your service expectations.

  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Track rollers and idlers are sealed and require no maintenance.
  • Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
  • Coded wiring takes the guesswork out of electrical system identification.



A  Overall Operating Height - Fully Raised 4267 mm
B  Height to Hinge Pin - Fully Raised 3239 mm
C  Reach - Fully Raised 876 mm
D  Dump Angle - Fully Raised 40.2°
E  Dump Height - Fully Raised 2489 mm
F  Maximum Rollback Angle - Fully Raised 102.5°
G  Overall Height at ROPS 2103 mm
H  Overall Length with Bucket - Standard Counterweight 3658 mm
I  Overall Length without Bucket - Standard Counterweight 2814 mm
J  Specified Height 1715 mm
K  Reach at Specified Height 790 mm
L  Dump Angle at Specified Height 75°
M  Maximum Rollback Angle at Ground 30°
N  Carry Position 179 mm
O  Maximum Rollback Angle at Carry Position 33°
P  Digging Position - Below Ground 7.6 mm
Q  Angle of Departure with Standard Counterweight 30.4°
R  Ground Clearance 343 mm
S  Track Gauge 1313 mm
T  Track Shoe Width 320 mm
U  Crawler Base 1392 mm
V  Overall Width - Less Bucket 1636 mm
W  Bucket Width 1674 mm
X  Clearance Radius - Front With Bucket 2322 mm
Z  Clearance Radius - Rear with Standard Counterweight 1577 mm
Maximum Rollback at Specified Height  66.8°
Angle of Approach 90°
Grouser Height 25 mm


Operating Capacity at 35% Tipping Load 794 kg
Operating Capacity at 50% Tipping Load 1134 kg
Tipping Load 2268 kg
Operating Weight 3903 kg


Make/Model Yanmar/4TNV98 Interim Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 3.3 L/4
Gross Power @ rpm 52.1 kW @ 2500
Net Power @ rpm 51 kW @ 2500
Peak Torque @ rpm 242.7 Nm @ 1600
Oil Pump Capacity 10.4 L
Alternator Voltage/Amperage 14V/95A

Track Drives

Drawbar Pull/Tractive Effort 5371 kg
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 320 mm
Ground Pressure 0.43 bar


Bucket Breakout - Tilt Cylinder 2354 kg
Bucket Breakout - Lift Cylinder 2195 kg
Ground Speed - Single Speed 8.2 km/hr
Ground Speed - Two Speed 12.1 km/hr


Fuel Tank 91 L
Hydraulic Reservior Tank 41.6 L
Coolant Capacity 13.3 L


Auxiliary Hydraulic Flow - Rated Speed 70.0 L/min
High-Flow Hydraulic Flow - Rated Speed 128.8 L/min
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 850 CCA @ -18°C
Gehl RT175 Track Loader Specifications Diagram



All-Tach® Mounting System Standard
IdealTrax™ Exclusive Standard
Straight Tracking
Power-A-Tach® Mounting System Optional
Self-Leveling Hydraulic Lift Action Standard
Selectable Self-Leveling Lift Action Optional
Two-Speed Drive Standard
12-Volt Battery Standard


Engine Alert System with Error Display Standard
Engine Automatic Shutdown System Standard
Grid/Manifold Heater Starter Assist Standard
Dual-Element Air Cleaner with Indicator Standard

Hydraulic System

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional


Elevated Planetary Final Drives Standard
Maintenance Free Rollers Each Side 3
Single Flange Front/Dual Flange Rear Idlers Standard
Rubber Track Undercarriage System Standard
Servo-Controlled Hydrostatic Drive Standard
Dedicated Undercarriage Standard


Tilt-out Foot Pod Exclusive Standard
Back-up Alarm Standard
Combination Radiator & Hydraulic Oil Cooler Standard
ROPS/FOPS Level II Overhead Guard Standard
Anti-Vandalism Lock Provisions Standard
Mechanical Lift Cylinder Lock Standard

Operator's Station

Pressurized Cab Enclosure with A/C Optional
Multi-Function Function Display Screen Standard
Drive Sensitivity Adjustment Standard
Electronic Attachment Control - 14-Pin Connector Optional
Electro-Hydraulic Joystick Controls Standard
Selectable Control Pattern Configuration Optional
Variable Speed Control, Selectable On & Off Optional
Foot Throttle Standard
Full-Suspension Seat Standard


Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty