V330 GEN:2
Vertical-Lift Skid Loader

  • Height to Hinge Pin - Fully Raised: 3332 mm
  • Rated Operating Capacity: 1497 kg
  • Power: Net 52.7 kW @ 2500
Find a Dealer Request More Info
V330 GEN:2 Skid Loader

Performance

The Gehl V330 skid loader is a shining example of Gehl’s superior innovation and well thought-out product development.

  • Self leveling lift action for better control of lifting loads.
  • The new chassis aids in superior weight distribution, which further enhances stability. New rear bumper provides additional protection and towing capability.
  • Thick steel plating and heavy-duty pins and bushings make this loader stronger than any other machine in its class.
  • A heavily constructed vertical-lift boom provides substantial forward reach at trailer loading and dumping heights.
  • Electronic engine control and foot throttle allow operation at part throttle, reducing sound levels and fuel consumption.

Operator's Cabin

The operator’s compartment on the V330 skid loader provides a safe and comfortable working environment for operators of all sizes.

  • Cab forward design enhances the view to the bucket. Level II FOPS is standard equipment.
  • New side-folding restraint bar and armrests with multiple adjustments enhance operator safety and comfort.
  • Fully adjustable controls and an optional air-ride seat deliver outstanding comfort.
  • Extra-large side screens combined with a low-profile lift arm design provide a wide field-of-view to the side work areas.
  • Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner and quieter operating environment.
  • Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions.

Controls

Controls on the Gehl V330 skid loader are ergonomically designed to reduce operator fatigue and increase productivity.

  • Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue.
  • New upper-left and upper-right instrument panels provide easy readout and switch access.
  • Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability.
  • Infinitely adjustable proportional auxiliary hydraulics.
  • Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

Stage 3A engines combine power and efficiency on the V330 model.

  • Engine consumes less fuel, making a positive impact on the bottom line.
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine has conventional water/ethylene glycol liquid-cooled design.
  • Engine warranty, parts and service are handled through normal dealership servicing in conjunction with Gehl parts and service support.
Make Yanmar
Model 4TNV98T Stage 3A
Net Power @ rpm 52.7 kW @ 2500
Maximum Torque 294 Nm @ 1625
Travel Speed - Max with 2-Speed Option 19.2 km/hr
Gehl Vertical Lift Skid Loader V330 Engine

Hydraulics

When maximum hydraulic power is needed to run demanding attachments, the V330 skid loader is equipped with the tools to get the job done right.

  • Higher system pressure delivers more hydraulic muscle to power demanding attachments and deliver superior lifting and breakout forces.
  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Standard auxiliary detent allows the operator to set attachment for continuous operation.
  • Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material at faster transport speeds.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Pilot-controlled hydrostatic transmission with direct engine coupling provides high operating efficiency.
Auxiliary Hydraulics - Standard 82 L/min
High-Flow Hydraulics - Optional 137 L/min
System Relief Pressure 237.8 bar
Reservoir Capacity 40 L


Lift Arm

The V330 skid loader vertical-lift arm design was created for maximum reach, superior strength and optimal operator visibility.

  • Additional reach is achieved at trailer loading and unloading heights.
  • Self-leveling lift action provides better control of lifting loads.
  • Low-profile lift arm design provides outstanding forward and side visibility.
  • New single-plane lift-arm design features a heavy-duty timing link, upper-rear channel support and large diameter pivot pins, providing best-in-class vertical and lateral strength and rigidity, as well as exceptional rear visibility.
  • Four-point support through dual bucket cylinders and two lift arm stop blocks on the front of the main frame evenly distribute digging forces.
Height to Hinge Pin - Fully Raised 3332 mm
Dump Reach at Full Height 813 mm

Serviceability

At Gehl we know ease of serviceability is very important to our customers. The model V330 skid loader is sure to exceed their expectations.

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Large rear door easily opens on hinges on right side, allowing full access for servicing and maintenance.
  • Remote engine oil filter is on left side; easy access to hydraulic oil filter on right side.
  • Entire ROPS/FOPS assembly tilts rearward with a hydraulic lift for easy internal service access.
  • Drive chains and axle bearings are sealed systems that require no maintenance.
  • Coded wiring takes the guesswork out of electrical system identification.
Gehl V330 Service Access

Specifications

Dimensions

A  Overall Operating Height - Fully Raised 4369 mm
B  Height to Hinge Pin - Fully Raised 3332 mm
C  Overall Height to Top of ROPS 2083 mm
D  Ground Clearance to Chassis 229 mm
E  Overall Length with Bucket 3874 mm
F  Overall Length without Bucket 3023 mm
G  Wheelbase 1257 mm
H  Dump Reach - Fully Raised 813 mm
I  Rollback at Ground 29°
J  Dump Angle 42°
K  Overall Width  1829 mm
L  Bucket Width 1880 mm
M  Clearance Circle - Rear 1765 mm
N  Clearance Circle - Front without Bucket 1422 mm
O  Clearance Circle - Front with Bucket 2400 mm
P  Seat to Ground Height 1041 mm
Q  Rollback at Specified Height 94°
R  Dump Height 2502 mm
S  Departure Angle 25°
Standard Specification Tire Size 14.00 - 17.5 HD

Engine

Make Yanmar
Model 4TNV98T Stage 3A
Net Power @ rpm 52.7 kW @ 2500
Gross Power @ rpm 53.7 kW @ 2500
Displacement 3.3 L
Maximum Torque 287.4 Nm @ 1650

Hydraulic System

Auxiliary Hydraulics - Standard 82 L/min
High-Flow Auxiliary Hydraulics - Option 137 L/min
System Relief Pressure  237.8 bar
Reservoir Capacity 40 L

Capacities/Weights

Rated Operating CapacityA 1497 kg
Fuel Tank 75.7 L
Travel Speed - Maximum 13.0 km/hr
Travel Speed with Two-Speed OptionB - Maximum 19.6 km/hr
Operating WeightC - Approximate 4123 kg

A - Per SAE J818, SAE J732 and ISO 14397

B - Two-speed is optional on V270 and standard on V330

C - Weight of base unit with standard equipment, standard bucket and 79 kg operator and full fuel tank

Gehl Vertical Lift Skid Steer V330 Reference Diagram

Options

Control Patterns

Hand/Foot Controls Optional
Joystick Controls Standard
Dual-Hand Controls Optional

Engine

Engine Auto-Shutdown System Standard
Engine Pre Heater Standard
Turbo-charged Engine Standard

Hydraulics

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional

Operator Station

Adjustable Arm Rests/Control Towers Standard
Air-Conditioning Optional
High Back Adjustable Seat Standard
Suspension Seat - Air Ride Optional
Suspension Seat - Mechanical Optional
Cab Enclosure Optional
Foot and Hand Throttles Standard
Full Instrumentation Standard
Heating Optional
Horn Standard
Integral Access Plate (Removable) Standard
Operator Restraint Bar Standard
ROPS/FOPS Level II Overhead Guard Standard
Sound Reduction Material Standard
Suspension Seat - Mechanical Standard
Work Lights - Front and Rear Standard

Performance

All-Tach® Attachment Mounting System Standard
Power-A-Tach® Attachment Mounting System Optional
Electronic Attachment Control - 14-Pin Connector Optional
Anti-Vandalism Protection Standard
Back-Up Alarm Optional
Brake Control (Auto/Manual)/td> Standard
Counterweight Standard
Hydraglide™ Ride Control Standard
Hydraloc™ Safety System Standard
Hydrostatic Drive - Servo Standard
Lift Arm Support Device Standard
Self-Leveling Lift Action Standard
Two-Speed Drive Optional

Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty